- Performance Collection
i·V4
Great for bi-amping, the elegant i·V4 amplifier features state of the art ICEedge® technology and approaches 80% efficiency while delivering 610 watts per channel into 8 ohms or 660 watts per channel into 4 ohms all channels driven.
Featuring state of the art ICEedge® technology, the elegant four channel amplifier approaches 80% efficiency while delivering 610 watts per channel into 8 ohms all channels driven. Such exceptional power is the product of very high current (i) and voltage (V) output capabilities providing stability into low impedances with a peak output current capability of 38A.
i·V 4 Features:
- Short circuit protection
- Thermal protection
- Triggered On/Off
- Standby switch
- Front panel status indicator
Say goodbye to excessive heat and transformer hum. The crystal-clear sound is virtually noise-free and reliability is assured- after all, it’s a Legacy.
The Legacy i·V series is available in a monoblock up to an eight channel configuration.
-
ICEedge® Technology
These long life amplifiers employ ICEedge® technology to sound as clean and uncolored as the best of the best while running much cooler. This balanced differential design operates against a background of silence while delivering incredible current and voltage outputs on demand.
-
Increased Resolution
Take advantage of the increased dynamic capability of today's high resolution recordings with the Legacy i·V amplifier series. You will enjoy a lower noise floor in your recordings, stronger crests and increased dynamic resolution.
Learn More
Higher amplifier power assures the proper snap in transients and means dense musical arrangements will avoid the smearing, strain and inevitable distortion as complex passages reach higher levels.
-
- Product Manual Download Manual
- Power Rating: 660 watts per channel x 4 @ 4 ohms, all channels driven 610 watts per channel x 4 @ 8 ohms, all channels driven
- Peak Power: 1.2 kW peak power from any channel @ 4 Ohm/ 1kHz with less than 1% distortion
- Over Current Protection: Breaker reset for excessive sustained current
- Inputs: Fully balanced XLR, single-end RCA
- Outputs: Gold plated safety approved five-way binding postsD
- Damping factor: 750 average, 20Hz to 1kHz
- Voltage Gain: 25.8 dB
- Dynamic Range: 127 dB, A-weighted
- Voltage/Current: 98 Vp/ 38Ap
- Input Sensitivity: 5.0 Vp @ 1200W/4 Ohm
- Input Impedance: 38 kOhm for both pin 2+ and pin 3-
- Channel Seperation: 120 dB at 1kHz
- Unit Dimensions: 17.5" W x 15.6" D x 5.8" H
- Shipping Weight: 30 lbs
- Notes: Highest power output can be obtained using a single 230V, 20A line or dual 120V, 20A lines. A conventional single AC cord is provided.
-
- Article: Legacy Audio's High Performance i.V Amplifier Series
- Article: Is Your System 24-Bit Ready?
- Article: New Legacy i·V “Powerhouse Amplifiers” Audioholics Interview with Bill Dudleston
- Article: Amplifiers for the Future of High Performance Audio
- Review: i·V2 "A Remarkable Achievement in Amplification"
- Review: i·V4 ULTRA is “Easily My Favorite Amp of All Time- An Exhilarating Experience”
- Review: Legacy i·V7: “The Future for Surround Sound Amplifiers… All I Can Say is Wow.”
Related Products:
-
Masters Collection
i·V4 ULTRA
Legacy's i·V4 ULTRA offers a dedicated module for each of its four channels. The amplifier approaches 80% efficiency while delivering 610 watts per channel into 8 ohms, 1,000 watts into 4 ohms.
Learn More -
Lifestyle Collection
Powerbloc4
The Legacy Powerbloc4 is the perfect option for bi-amping speakers and high performance surround sound applications.
Learn More -
Masters Collection
i·V2 ULTRA
Take advantage of the increased dynamic capability of high resolution recordings with the Legacy i·V2 ULTRA dual mono amplifier. You will enjoy a lower noise floor in your recordings, stronger crests, and increased dynamic resolution.
Learn More -
Performance Collection
Focus SE
A favorite of recording and mastering studios, audiophiles and home theater enthusiasts alike, the Focus SE is the reference standard in full range speakers.
Learn More
