- Masters Collection
i·V1 ULTRA Mono Bloc
Featuring state of the art ICEedge® technology, the elegant Legacy i·V1 ULTRA monoblock amplifier approaches 80% efficiency while delivering 1,125 watts per channel into 8 ohms, 1,600 watts into 4 ohms.
Featuring state of the art ICEedge® technology, the elegant Legacy i·V1 ULTRA monoblock amplifier approaches 80% efficiency while delivering 1,125 watts per channel into 8 ohms, 1,600 watts into 4 ohms. Such exceptional power is the product of very high current (i) and voltage (V) output capabilities providing stability into low impedances with a peak output current capability of 38A.
i·V1 ULTRA Mono Bloc Features:
- Short circuit protection
- Thermal protection
- Triggered On/Off
- Standby switch
- Front panel status indicator
Say goodbye to excessive heat and transformer hum. The crystal-clear sound is virtually noise-free and reliability is assured- after all, it’s a Legacy.
The Legacy i·V series is available in a monoblock up to an eight channel configuration.
"Does That Extra Power Make A Difference? In My Listening It Certainly Did." - Al Griffin, Sound & Vision
-
ICEedge® Technology
These long life amplifiers employ ICEedge® technology to sound as clean and uncolored as the best of the best while running much cooler. This balanced differential design operates against a background of silence while delivering incredible current and voltage outputs on demand.
-
Increased Resolution
Take advantage of the increased dynamic capability of today's high resolution recordings with the Legacy i·V amplifier series. You will enjoy a lower noise floor in your recordings, stronger crests and increased dynamic resolution.
Learn More
Higher amplifier power assures the proper snap in transients and means dense musical arrangements will avoid the smearing, strain and inevitable distortion as complex passages reach higher levels.
-
- Product Manual Download Manual
- Power Rating: 1,600 watts per channel @ 4 ohms, 1,125 watts per channel @ 8 ohms
- Peak Power: 2.0 kW peak power @ 4 Ohm/ 1kHz with less than 1% distortion
- Over Current Protection: Breaker reset for excessive sustained current
- Inputs: Fully balanced XLR, single-end RCA
- Outputs: Gold plated safety approved five-way binding posts
- Damping factor: 800 average, 20Hz to 1kHz
- Voltage Gain: 29.5 dB
- Dynamic Range: 127 dB, A-weighted
- Voltage/Current: 149 Vp/ 38Ap
- Input Sensitivity: 5.0 Vp @ 1200W/4 Ohm
- Input Impedance: 38 kOhm for both pin 2+ and pin 3-
- Channel Separation: 120 dB at 1kHz
- Unit Dimensions: 17.5" W x 15.6" D x 5.8" H
- Unit Shipping Weight: 33 lbs each
-
- Article: Legacy Audio's High Performance i.V Amplifier Series
- Article: Is Your System 24-Bit Ready?
- Article: New Legacy i·V “Powerhouse Amplifiers” Audioholics Interview with Bill Dudleston
- Article: Amplifiers for the Future of High Performance Audio
- Review: i·V2 "A Remarkable Achievement in Amplification"
- Review: i·V4 ULTRA is “Easily My Favorite Amp of All Time- An Exhilarating Experience”
- Review: Legacy i·V7: “The Future for Surround Sound Amplifiers… All I Can Say is Wow.”
Related Products:
-
Masters Collection
i·V2 ULTRA
Take advantage of the increased dynamic capability of high resolution recordings with the Legacy i·V2 ULTRA dual mono amplifier. You will enjoy a lower noise floor in your recordings, stronger crests, and increased dynamic resolution.
Learn More -
Lifestyle Collection
i·V3
Featuring state of the art ICEedge® technology, the elegant i·V3 amplifier approaches 80% efficiency while delivering over 600 watts per channel into 8 ohms all channels driven.
Learn More -
Masters Collection
i·V4 ULTRA
Legacy's i·V4 ULTRA offers a dedicated module for each of its four channels. The amplifier approaches 80% efficiency while delivering 610 watts per channel into 8 ohms, 1,000 watts into 4 ohms.
Learn More -
Performance Collection
Powerbloc2 ULTRA
Legacy's PowerBloc2 ULTRA is a dual monoblock design offering independent power supplies doubling the current capability of the PowerBloc2.
Learn More